Wood furniture is a basic requirement at all our homes and offices. It is not that much challenging to judge the quality of the wood neither you need any expertise to know about it. The only essential thing you need to do is look for the design, finish, and material of the wood. Here we will let you know what kind of wood quality you must look at and let you familiar with some wooden furniture terms.

Source of wood.

Wooden furniture are made of soft, engineered or hardwoods. Knowing what kind of wood is used in the furniture is vital as that determines the durability and life of the wood.

The most quality wood can be obtained from hardwoods, which are obtained from Suar, Teak, Oak, Birch, cherry, maple and walnut trees. After the wood is cut, they are air-dried and Kiln dried for eradicating all the moisture from it.

Softwood can be obtained from Fir, redwood, Pine and cedar trees. Yes, these woods also produce good quality furniture but then they are delicate with regards to dents and scratches.

Solid Wood furniture was used in past and even at some places it can be found but now people prefer furniture made from Plywood (engineered wood).  This does not mean Plywood are not strong and are low in quality. In fact, they are strong enough to prevent any breaking or tweaks. They are attractive, long-lived and prove to be high on quality.

The Framework

How the wood piece has been engineered into beautiful wooden furniture addresses about the durability and beauty of it. The carpentry and design carved out of the wood tell a lot about the wood quality.

The traditional as well as most ancient way of bringing the furniture together is Mortise & Tenon and Dovetails. They are used till now because they are stronger and provide attractive joints. Glue used to stick the furniture does not show up outside the phase of furniture.

The corner of the furniture let you know about the strength of the furniture. You cannot view the bolts attached to joints as they are done in the interior of the furniture. Usually, the desk and drawers made have dust panels attached to it so that it does not get stuck with any cloth and is dust free. They are structurally stronger.

For lateral stability, screws are attached to the back panels. The back of the furniture, which is usually not exposed, must be smooth. These are the features of well-constructed furniture.

suar wood

Good finish is sign of Quality Furniture

Forming a wood into furniture goes through several processes. Sanding, Staining, and Finishing are some of the key processes, which help in making good furniture. If any of these is left out, it will affect the quality of the furniture. A rather good piece of furniture will have smooth finishing as whenever you run your hand over, you glide it effortlessly without any wood piece hurting your hands. If the wood is not sanded properly, staining would also be improper. Always look upon the furniture from all angles whether there are any scratches or unfinished touch to it or not.

Staining also plays a major part as it let the furniture stand out amongst others. If staining is no properly done, you may find dark spots on the piece.

The finish of the furniture varies from Glossy to Matte. Quality finish boasts of smooth and rough free piece with no bubbles or air. Ensure the finish is done on the backside and underside of the furniture as well.

Indications of Poorly finished furniture

A poorly finished wood have rough surface, dull or dark spots due to improper staining, dents, and dust accumulated in edges. Sometimes even the sanding is inappropriate while staining has loopholes. You can instantly say which are not good quality and needs a finish, just by a glance.

If your sourcing awesome Solid wood furniture in Singapore, visit www.suarwood.sg.

Comments are closed.

Post Navigation